150psi Sensor Kit 1/8-N PT Male

Fitment

Choose your exact year, make, model, and trim to review this product’s applications.

Description

AEM 30-2130-150 is a stainless-steel automotive pressure-sensor kit covering 0–150 PSIg. Its gauge-pressure reference reads zero at ambient atmospheric pressure; use its exact voltage scaling when configuring a compatible ECU or data logger.

Technical specifications

Measurement 0–150 PSIg, gauge pressure Output Linear 0.5–4.5 V Calibration PSIg = 37.5 × output volts − 18.75 Power 5 V ±0.5 V; <6 m A Accuracy ±1% full scale Operating Temperature −40 to 105°C Response <1 ms Connection 1/8-inch NPT male; Packard 3-pin electrical connector Materials 304L body; 316L wetted material Application and compatibility

For applications requiring a 0–150 PSIg sensor and 1/8 in NPT port. The receiving ECU or logger requires a regulated 5 V supply, sensor ground and the correct analog-input scaling.

Manufacturer documents

Manufacturer product information

AEM pressure-sensor instructions and kit contents

AEM exact sensor voltage scaling

Key features

• Gauge-pressure measurement for fluid-pressure monitoring
• Sealed, welded stainless construction
• Mating connector and terminals supplied

Specifications

General

What's in the box

• 150 PSIg stainless pressure sensor
• Mating connector and terminal kit
• 1/8 in NPT to -4 adapter

A 3/16 in hose-barb adapter is not confirmed for this kit.

Install & Results

At a glance

• Use the model-specific manual for connector pin assignment and wiring to ECU/logger sensor ground, regulated 5 V and analog input. Pull-to-seat terminals require the wire to pass through the connector before crimping.