00-09 S2000 6 Pad Sprung Disc Clutch (No Bearings)

Fitment

Choose your exact year, make, model, and trim to review this product’s applications.

Description

ACT HS1-HDG6 pairs a Heavy Duty pressure plate with a sprung six-pad ceramic disc for S2000 competition builds. Bearings are purchased separately.

Technical specifications

Manufacturer part number HS1-HDG6 Crank torque capacity 475 lb-ft Capacity over oe 78% Disc diameter 212 mm / 8.3 in Input shaft 1.03125 in; 24 splines Manufacturer kit weight 13.9 lb Application and compatibility

2000–2003 Honda S2000 Base 2.0L; 2004–2009 S2000 Base 2.2L; 2008–2009 S2000 CR 2.2L.

Manufacturer documents

ACT exact product page

ACT application chart, dated 2026-08-18

ACT general installation instructions

ACT limited warranty

Product specifications

Product Weight (lbs.): 13.9

Torque Capacity (ft/lbs.): 475

Key features

• Spring hub cushions torsional vibration
• Aggressive engagement with light-to-moderate pedal effort
• ACT's application chart does not recommend this kit for street use

Specifications

General

What's in the box

• H021 pressure plate
• 6212210 disc
• AT61 alignment tool

Release bearing, pilot bearing and flywheel are not included.

Install & Results

At a glance

• Professional installation recommended.
• Supporting modifications required:
  • Separate release and pilot bearings
  • Compatible flywheel; no flywheel supplied
• Check disc travel on the input shaft and replace the pilot bearing Inspect friction surfaces and release-system wear before assembly Kit does not include bearings.

Warranty

Limited warranty (documented)

One-year limited materials/workmanship warranty for the original retail buyer. Authorized-dealer receipt required; misuse, improper installation and labor costs excluded.

Term: One-year limited warranty

Manufacturer warranty policy